The GMT100 is a water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GMT100's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. Further reduction in current drain is achieved by configuring alternative recharge schemes for the internal battery. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.
Wide operating voltage 8V to 32V DC
Internal u-blox chipset
Low power consumption, long standby time with internal battery
Quad band GSM/GPRS 850/900/1800/1900 MHz
Embedded full featured @Track protocol
Multiple I/O interfaces for monitoring and control
Internal 3-axis accelerometer for power conservation and motion detection
Power consumption can be fully configured
Three working power modes
Water resistant, IPX6 compliant
To set ygVaITE wP KnP you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.
- Begin with the configuration
- Set the time zone UTC-0
- Set up our operator APN
- Establish the server where we will connect
- Define how often will transmit position 60 seconds.
- Activate notification by SOS button input 2