Loading...

QuecLink - GL500

The GL500 is a powerful GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL500 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL500 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL500 into existing tracking systems based on this full featured protocol.

Features: 
  • Low power consumption, long standby time for more than 1000 days

  • Powered by two user replaceable lithium batteries (CR123A)
  • Internal u-blox chipset
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded @Track protocol
  • Internal 3-axis accelerometer for motion detection
  • Internal GSM antenna
  • Internal GPS antenna
  • Internal microphone (optional)
  • CE/FCC certified

 

This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GL500

Country
Operator
APN
User
Password

To set aVjJ3xj 3X zhO you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.

  1. Begin with the configuration
    4N8jlMAKIdJm9ErVO0E355Qm3yp
  2. Set the time zone UTC-0
    HtSKADMOaVVJylxH0kZi30HYWUm1oQbik
  3. Set up our operator APN
    Cii3oKpWPjnezMEhcaCklR6LXaPoVScvZF1WpqN8NPXbNOi6f9
  4. Establish the server where we will connect
    PavmZ8O64wKhMGItXObMqaJe1Sy8Ylnn1OCLOwO8owLgN72B1ZykVqwzQRuHKQiTIgp7E7fk
  5. Define how often will transmit position 60 seconds.
    Adi3OnQ4ZwH8wDSKcM46BGyYO2XrR5744Ok2I2lnA0sXJjhFOff1
  6. Activate notification by SOS button input 2
    mxd5QumXfN5AA7G1EuUs2wMDWW4e8J2SJVqpSez