The GL505 is a powerful waterproof GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL505 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL505 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL505 into existing tracking systems based on this full featured protocol.
Waterproof, IPX7 compliant
Low power consumption, long standby time for more than 1000 days
Powered by two user replaceable lithium batteries (CR123A)
Internal u-blox chipset
Quad band GSM/GPRS 850/900/1800/1900 MHz
Embedded @Track protocol
Internal 3-axis accelerometer for motion detection
Internal GSM antenna
Internal GPS antenna
To set G13CZnM T1 JYo you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.
- Begin with the configuration
- Set the time zone UTC-0
- Set up our operator APN
- Establish the server where we will connect
- Define how often will transmit position 60 seconds.
- Activate notification by SOS button input 2