Loading...

V-SUN - V-680

Functions
* Call (default), two-way call
* Auto-answer
* Low cell alarm
* Mode shifting
* SOS Emergency Alarm
* Server shifting
* Automatic time calibration
* Remote monitoring
Hardware
* Charging voltage:110-220V
* Working temperature -20°-—65°
* Humidity: 5%-95%
* Limited working temperature:-30°C -- -40°C, +80°C-- +85°C
* Storing temperature:-45°C -- +90°C
* Start-up time, hot start: <1.5s Warm start: <34s Cold start: <35s(Autonomous)
* Accurate positioning: 3.0 m 2D-RMS , DGPS: 2.5 m
* Speed Positioning: 0.1m/s, DGPS:0.05m/s
* Power consumption: standby 48mA(Depending on the system network state and the user’ s operation method)
* Charging port: DC 5V 3A
This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up V-680

Country
Operator
APN
User
Password

To set AnZWNb you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Factory reset
    3tKPWyxvlvuPo
  2. Set up our operator APN
    Mv4Ya0qcxyE058ZoXvJcSquuyuNjtQYtNJ3Xu
  3. Establish the server where we will connect
    2s28x5dz3pyMJ10EPGgBKjqmHsgaUn
  4. Define how often will transmit to our example 120 seconds
    wFB4eCQefvQ55EZWk
    Zho7DXWjSCQ1FYDeP
  5. Enable GPRS mode
    lNuIG2q
  6. Enable GPS mode
    qtrpUL9