Loading...

V-SUN - V-680

Functions
* Call (default), two-way call
* Auto-answer
* Low cell alarm
* Mode shifting
* SOS Emergency Alarm
* Server shifting
* Automatic time calibration
* Remote monitoring
Hardware
* Charging voltage:110-220V
* Working temperature -20°-—65°
* Humidity: 5%-95%
* Limited working temperature:-30°C -- -40°C, +80°C-- +85°C
* Storing temperature:-45°C -- +90°C
* Start-up time, hot start: <1.5s Warm start: <34s Cold start: <35s(Autonomous)
* Accurate positioning: 3.0 m 2D-RMS , DGPS: 2.5 m
* Speed Positioning: 0.1m/s, DGPS:0.05m/s
* Power consumption: standby 48mA(Depending on the system network state and the user’ s operation method)
* Charging port: DC 5V 3A
This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up V-680

Country
Operator
APN
User
Password

To set eOpgCdn BY mXl you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Factory reset
    On8erBiQ8gfuF
  2. Set up our operator APN
    xD4GvRtVjRPT7QudQNKbH31ncsuRpexpNHUGU
  3. Establish the server where we will connect
    1zcXqmC8DTLTqb1VFy4MQnChcqEdkG
  4. Define how often will transmit to our example 120 seconds
    z6oJZYrEaRzpZZj89
    D5THTa4DOw549iiX7
  5. Enable GPRS mode
    KlwJatQ
  6. Enable GPS mode
    Rb4UScA