The Suntech ST4345LB is a low-cost BLE tracker designed for efficient and reliable asset tracking. With LTE Cat. M1/NB-IoT/2G network compatibility, this tracker ensures seamless connectivity and wide coverage. It also features BLE communication with sensors, allowing for easy integration with various IoT devices and applications. One of the standout features of the ST4345LB is its DPA (Driving Pattern Analysis) and CR (Crash Reconstruction) capabilities. These advanced functionalities provide valuable insights into driving behavior and accident data, making it an ideal choice for fleet management and vehicle monitoring. Additionally, the tracker is waterproof and IP67 compliant, ensuring durability and reliability even in harsh environments. The ST4345LB supports geo-fences, both circular and polygonal, enabling users to set up virtual boundaries and receive alerts when assets enter or exit designated areas. It also offers maintenance server support, allowing for remote configuration and firmware updates. Furthermore, the tracker can identify virtual ignition through voltage or motion detection, providing accurate information about engine status. In terms of technical specifications, the ST4345LB operates on LTE Cat. M1/NB-IoT/2G networks and supports frequencies such as B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B85 for LTE Cat. M1 and B1, B2, B3, B4, B5, B8, B12, B13, B18, B19B, 20, B25, B28, B66, B71, B85 for LTE Cat NB2. It also features Bluetooth 4.2 for wireless communication and TCP/UDP transmission protocol. The GNSS receiver includes GPS and Glonass with SBAS support for enhanced accuracy. The tracker has a compact size of 74 x 45 x 19.5 mm and weighs 102 g (with event cable). It is equipped with 5 wired connections, LED indicators for network and GPS status, and an internal antenna. The ST4345LB operates in a wide temperature range from -30˚C to +80˚C and is dust and water-resistant with an IP67 rating. It is certified by FCC, IC, and PTCRB, ensuring compliance with industry standards.
Set Up ST4345LB
To set the tracker send the following commands by SMS messages,
the ID is the last 6 numbers of IMEI excluding the last number.
for example, if the IMEI is k9uqPM9jbLARtTs the device Id is 4UQh2d
-
Set the operator APN and GPRS server
SA200NTW;{{('XXXXXX' + imei.substring(8,14)).slice(-6)}};02;10;{{apn}};{{apnu}};{{apnp}};54.85.159.138;8888;;;; -
Set the update interval to 60 seconds
SA200RPT;{{('XXXXXX' + imei.substring(8,14)).slice(-6)}};02;60;60;60;3;0;0;0;0;0
To check settings SA200CMD;{{('XXXXXX' + imei.substring(8,14)).slice(-6)}};02;PresetA