The ST8310UM is an ultra-compact LTE Cat 1 GPS tracker engineered for vehicle and asset tracking in exposed or harsh environments. Designed for integrations, the ST8310UM is Plaspy compatible out of the box, delivering reliable real-time tracking, essential telemetry and low-power behavior tailored to fleet management and anti-theft deployments.
The small-form-factor ST8310UM combines LTE Cat.1 connectivity with 2G fallback, robust GNSS positioning and IP67 environmental protection. Plaspy users benefit from fast location updates, configurable geofences and event-driven reporting that enable recovery workflows, operational telematics and actionable alerts across mixed fleets.
Key Highlights
- Plaspy compatible GPS tracker for real-time tracking and centralized fleet management.
- LTE Cat.1 with 2G fallback for broad cellular coverage and TCP/UDP telemetry transmission.
- IP67-rated, compact form factor (61.2 × 53.2 × 20.8 mm) for exposed installations and harsh environments.
- Virtual ignition detection (voltage/motion) and built-in 3-axis accelerometer for event and harsh-driving detection.
- Rechargeable backup battery (3.7 V, 220 mAh) and wide DC input (8–33 V) for robust vehicle power management.
- Configurable geofencing (circular and polygonal) and tamper / optional jamming detection for anti-theft workflows.
- Low sleep and deep-sleep current draw to preserve vehicle battery when parked—ideal for long-term asset monitoring.
How It Works with Plaspy
When connected to Plaspy, the ST8310UM streams GNSS and status telemetry to the Plaspy platform using TCP/UDP, enabling real-time tracking, alerting and historical reporting. Plaspy ingests location fixes, accelerometer events, power-state changes and configured alarm triggers, then converts them into dashboards, notifications and actionable workflows for dispatch and recovery.
- Real-time location and telemetry updates (GNSS → Plaspy dashboards and maps).
- Virtual ignition status via voltage and motion detection for ignition-based reporting and trip summaries.
- Tamper and optional jamming detection forwarded to Plaspy for immediate anti-theft alerts.
- Accelerometer-based harsh event reporting (sudden acceleration, braking or impact) integrated into driver performance and incident logs.
- Geofence enter/exit events (circular and polygon) for automated alerts, route compliance and perimeter security.
- Power-loss and backup battery status reports to monitor vehicle power health and support recovery operations.
- Plaspy can correlate ST8310UM telemetry with external systems (fuel monitoring, immobilizers or Bluetooth sensors) where those additional inputs are available in the vehicle and on the platform.
Technical Overview
| Model | ST8310UM |
|---|---|
| Connectivity | LTE Cat.1 with 2G fallback; TCP/UDP transmission |
| Bands | LTE FDD B1, B3, B5, B7, B8, B20, B28; GSM 850 / EGSM900 / DCS1800 / PCS1900 |
| Power & Battery | DC 8–33 V input; main power inversion protection; 3.7 V, 220 mAh rechargeable Li-ion backup battery |
| Power Consumption | Typical 30–50 mA @12 V (regular reporting, 3 min); Sleep <5 mA @12 V; Deep sleep <3 mA @12 V |
| Interfaces & I/O | 5-wire connection harness (variable I/O options available); two status LEDs (network, GPS) |
| GNSS | GPS + GLONASS (L1); SBAS support (WAAS/EGNOS/MSAS); accuracy ≈ ±3 m CEP (50%); sensitivity down to -167 dBm |
| Position Fix Performance | Cold start <35 s (15 s with EASYTM); Warm <30 s (5 s with EASYTM); Hot <1 s |
| Sensors | Built-in 3-axis accelerometer for motion and harsh-event detection; tamper detection; optional jamming detection |
| Form Factor | Compact vehicle/asset tracker; 61.2 × 53.2 × 20.8 mm; 76 g (with event cable) |
| Environmental & Certification | IP67 dust/water resistant; Operating temperature -30°C to +85°C; ANATEL certification listed |
Use Cases
- Fleet management: continuous real-time tracking, trip reports and geofence-based workflows to optimize routing and utilization.
- Anti-theft and recovery: tamper and jamming alerts plus persistent GNSS tracking for quick recovery actions.
- Asset and equipment monitoring: compact IP67 enclosure for small assets and exposed installations, enabling long-term deployment.
- Driver and safety telemetry: accelerometer-driven harsh-event detection and trip summaries for incident review and coaching.
- Low-power parked vehicles: deep-sleep capability and backup battery allow discreet monitoring without draining the main battery.
Why Choose This Tracker with Plaspy
The ST8310UM delivers a balanced mix of rugged design, compact form and telematics essentials that make it a practical choice for Plaspy-compatible deployments. Its LTE Cat.1 connectivity and 2G fallback ensure broad cellular reach, while accurate GPS/GLONASS fixes and fast TTFF enable reliable real-time tracking across urban and rural scenarios. Low power draw, backup battery support and IP67 protection reduce maintenance and improve uptime for fleet and asset operators.
Paired with Plaspy, the ST8310UM becomes part of a scalable telemetry solution: location, ignition events, tamper alerts and harsh-driving data feed into Plaspy dashboards, reports and alerting rules. This makes it straightforward to add anti-theft workflows, integrate external fuel monitoring or immobilizer systems where available, and run centralized fleet management without sacrificing reliability or installation flexibility.
Set Up ST8310UM
To set the tracker send the following commands by SMS messages,
the ID is the last 6 numbers of IMEI excluding the last number.
for example, if the IMEI is 1NkPuM1WA3PcT0F the device Id is nhcoX6
-
Set the operator APN and GPRS server
SA200NTW;{{('XXXXXX' + imei.substring(8,14)).slice(-6)}};02;10;{{apn}};{{apnu}};{{apnp}};54.85.159.138;8888;;;; -
Set the update interval to 60 seconds
SA200RPT;{{('XXXXXX' + imei.substring(8,14)).slice(-6)}};02;60;60;60;3;0;0;0;0;0
To check settings SA200CMD;{{('XXXXXX' + imei.substring(8,14)).slice(-6)}};02;PresetA