WP - VT-300

Visit the manufacturer website

VT300GPS/GPRS/HSDPA Vehicle Tracking Device Expandable Design for Customization

  • Communication by Voice, CS Data, SMS, GPRS UDP/TCP for 2G
  • Communication by Voice, SMS, Edge, UMTS and HSDPA for 3G
  • Configurable Tracking & Logging mode, by Time interval,
    Distance interval, Speeding changes, Heading changes and IG status
  • User Defined Interface(UDI), expandable for customization
  • GPS/GSM antenna tempering alert
  • GSM Jamming alert (optional)
  • Geo-fencing control
  • Mileage report
  • Power Low/Lost alert
  • Towing away alert
  • Speeding alert
  • Power Management
  • Roaming preference settings
  • Maximum 100 settings in user defined reports
  • Internet Surfing via USB connection
  • Configuration over the air
  • Firmware upgrading over the air


This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Factory IL GPS with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Factory IL GPS's IP and port on your tracker: (Factory IL GPS detects tracker's protocol.)
    Server IP Port 8888
  • Add a Factory IL GPS Account on devices with the IMEI or unique ID.