Menu

TZone - TZ-AVL19

TZ-AVL19
Visit the manufacturer website

Description:
·Support single location and continual tracking         

·Over-speed alarm, Low power alarm, Geo-fence alarm        

·Tremble alarm, Parking alarm, SOS alarm        

·Control car doors close/open, detect the status of engine on/off        

·Cut off the  engine power gradually and safely when in urgency        

·GPRS(TCP/UDP), SMS Support        

·When without tremble the device will go into sleep mode. 

Specifications:  

Special Features:        

1.SD card record (optional)         

2.Can connect external  RFID Reader, Cameras, Printer (optional)        

3.3D accelerometer        

4.Support sending GPRS data to IP or DNS        

5.Mileage calculation         

6.32Mb flash memory         

7.Fuel/oil level detection         

8.Temperature sensors  (optional)         

9.Two- way conversation          

10.Mobile Google map

11.Support ibutton        

 

Configuración TZ-AVL19

Country Operator APN User Password

To set Factory IL GPS you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    JmSlTlryAs4AYJRTarCv0jH8mbQbmmMD1tC0Dp
  2. Define how often will transmit to our example 120 seconds
    vzLX9kf1cHpIjoxSBccW
  3. Establish the server where we will connect
    21Y18lHKUlSC8Yu0RkeT81VQMXg0IpGaP
  4. Activate the GPRS mode
    uqAgIpkFQBof2x

 


This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.