Menu

OKB Tehnoavtomatika - MTA-02 GLONASS

MTA-02 GLONASS
Visit the manufacturer website

SPECIFICATIONS

Device: GLONASS GPS, conducting satellite tracking of the object Channel tie with DC - GSM 900/1800 - sending / receiving data to DC, using data transmission; - sending / receiving data on the DC using GPRS; - sending / receiving data on DC using SMS; - receiving from the subscriber's SMS-messages; - handover of SMS-messages.Determination of coordinates: 50-channel high sensitivity GLONASS / GPS receiver MNP-M7. voltage supply DC from 9V to 50V and built-in rechargeable battery. Current consumption in active mode - no more than 180mA at a voltage of 12V. The current consumption in standby mode - no more than 65mA, the supply voltage of 12V. The current consumption in sleep mode - no more than 20 mA, the supply voltage of 12V. Built-in rechargeable battery with up to 600 mA / h. The average time of standby for at least 6 hours. Time of technical readiness of the device to work - no more than 3 minutes. Enclosure IP30. Overall dimensions of the device is not more than 110 × 80 × 32 mm. Weight device 300g.


This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Factory IL GPS with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Factory IL GPS's IP and port on your tracker: (Factory IL GPS detects tracker's protocol.)
    Server IP Port
    54.85.159.138 8888
  • Add a Factory IL GPS Account on devices with the IMEI or unique ID.