Menu

HunterPro - CP60-FUEL

CP60-FUEL
Visit the manufacturer website

Specially designed to measure the fuel level in tanks of transport units. Tne measurement of the fuel level is provided by a probe that is immersing into the fuel tank. The probe is designed as a coaxial capacitor with a metallic tube (external electrode) and a central electrode (inner electrode). The sensor probe immersed in a fuel operates as a capasitor. Its capacity linearly depends on fuel level in the tank. Also includes electronic circuitry that provides the linear transformation of the capacity into digital pulses. To determine the fuel volume the procedure of the tank calibration should be done to set the correspondence between fuel volume and measured sensor capacity.

 


This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Factory IL GPS with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Factory IL GPS's IP and port on your tracker: (Factory IL GPS detects tracker's protocol.)
    Server IP Port
    54.85.159.138 8888
  • Add a Factory IL GPS Account on devices with the IMEI or unique ID.