Menu

Generic - GT -110M

GT -110M
Visit the manufacturer website

    Advantages

  1. We have our own server platform & client software, all of which are developed by ourselves, and it's free for customers to enjoy the service;
  2. very easy to install;
  3. very small to hide;
  4. waterproof with thermoplastic hose;
  5. can cut off power/fuel supply of motorcycle/bike remotely if necessary;
  6. Reply with a Google link SMS;
  7. SOS emergence help can make the owner safe;
  8. Built-in motion sensor for power saving;
  9. movement alarm;
  10. power-cut alarm & low power alarm;
  11. GPS blind area alarm(in/out);
  12. with client software, it can be tracked at any time.

    Features

  • Owner can control the device by mobile phone
  • Reply with a Google link SMS, i.g., http://maps.google.com/maps?f=q&hl=en&q=+22.726045,+114.210323&ie=UTF8&z=16&iwloc=addr&om=1
  • Easy to hide, easy to install
  • Built-in battery: last for over 24hours
  • Engine alarm: At arm status, if someone starts the engine, the owner will receive an alarm SMS from the device and stop the motorbike automatically
  • Internal shake sensor: At arm status, if somebody shakes the motorbike, the device will send an alarm SMS to the owner
  • In arm/disarm status, press the SOS button for 3 seconds, the device will alarm
  • Power off alarm: When device power off, it will send the SMS to owner
  • Stop the motorbike: the owner can send the command to the device; the device will stop the motorbike intelligent (According to the speed)
  • If the device alarm at arm status, all the alarm should cancel with the disarm command
  • Real-time monitor function, uploading data about motorbike state and position in preset time interval and preset times 

    Specifications

  • Dimension: 70 * 45 * 16mm
  • Gross Weight: 150g (with built-in battery 1000mAH)
  • Exterior Power Supply: DC 9V ~ 36V
  • Inner lithium battery: as backup battery, works for 24hours
  • Power Consumption: Active mode(avg.), 12mA; Idle mode, 3mA; Sleep working mode, 0.01mA; Offline warning mode, 0.01mA (if exterior voltage is 12V)
  • Operating Temperature Range: -20 ~ +65 °C
  • Air pressure: 860Kpa ~ 1060Kpa
  • Humidity: 5% ~ 95% non-condensing
  • Position accuracy: <=15 meters
  • GSM chip: SimCom, support GSM 850/ 900/1800 /1900MHZ
  • GPS chip: Sirf-Star III (super-sensitivity and high accuracy ) 

This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Factory IL GPS with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Factory IL GPS's IP and port on your tracker: (Factory IL GPS detects tracker's protocol.)
    Server IP Port
    54.85.159.138 8888
  • Add a Factory IL GPS Account on devices with the IMEI or unique ID.