Menu

Generic - GPS 306

GPS 306
Visit the manufacturer website

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Function:

  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • mainteanance remind alert
  • Low battery alarm
  • External Power off alarm
  • GPS blind Spot alert
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number

This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Factory IL GPS with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Factory IL GPS's IP and port on your tracker: (Factory IL GPS detects tracker's protocol.)
    Server IP Port
    54.85.159.138 8888
  • Add a Factory IL GPS Account on devices with the IMEI or unique ID.