Coban - GPS306

Visit the manufacturer website

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.


  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • mainteanance remind alert
  • Low battery alarm
  • External Power off alarm
  • GPS blind Spot alert
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number

ConfiguraciĆ³n GPS306

Country Operator APN User Password

To set jTOC6u you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
  2. Set the time zone UTC-0
    uqVc MKYiYrJSXI 3
  3. Set up our operator APN
    w5Blqeh4h ZyGMSJJ
  4. Set the username and password of APN operator
    dfIgAsAJ hx0k9xck q4dysYlM
  5. Establish the server where we will connect
    kqTl7fVVimygo 3e6LIdVI3V1Yx Hw71
  6. Switch to GPRS mode to begin transmission UDP

To check settings ENQMWm3QmiL

To enable the status of the fuel sensor or improve the transmission of the status of the digital sensors E45vTXi7XZSLSn JM

This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.