The VT200-L is a Plaspy compatible 4G vehicle GPS tracker engineered for reliable, real-time tracking and comprehensive fleet telematics. Built for demanding vehicle environments, the VT200-L combines high-precision GNSS positioning with tri-band cellular fallback and robust I/O to deliver continuous location, telemetry and anti-theft capabilities to Plaspy-powered dashboards and alerting workflows.
The unit is optimized for fleet management, public transport, taxis, school buses and private-vehicle anti-theft use. With built-in flash memory for offline buffering, wide vehicle voltage support and IP66 ingress protection, the VT200-L ensures data integrity and uninterrupted reporting to Plaspy for live tracking, driver behavior monitoring and remote control actions.
Key Highlights
- Plaspy compatible real-time tracking over 4G LTE with 3G/2G fallback for broad coverage and fast position updates.
- Multi-GNSS support (GPS, BDS, GLONASS, QZSS) for improved position accuracy and resiliency in urban and challenging environments.
- Integrated 128 Mb flash memory to buffer historical positioning data during network outages and automatically resend when connectivity is restored.
- Extensive I/O: RS232, 1-Wire, digital/analog inputs and outputs, external mic/speaker and 5V accessory power for telemetry and peripherals.
- Advanced telematics features: driving behavior detection, geo-fence and parking alarms, trailer/tow and idling alarms to support fleet dispatch and safety programs.
- Fuel monitoring integration (ultrasonic or capacitive sensors) and fuel-steal alarm for accurate fuel monitoring and cost control.
- Rugged design (IP66) and wide voltage range (9–100V) for vehicle compatibility across light vehicles, heavy trucks and specialized fleets.
- Remote firmware upgrades (FOTA), dual-server upload and standard TCP/UDP/SMS transport for flexible device management and scalability.
How It Works with Plaspy
The VT200-L transmits location and vehicle telemetry to Plaspy using standard transport methods (TCP/UDP/SMS) and a platform-friendly protocol. Once provisioned in Plaspy, the tracker provides live position updates, event alerts and buffered historical data after signal restoration. Integration supports both periodic scheduled reporting and event-driven messages to power real-time monitoring and automated workflows.
- Real-time location and telemetry updates: GNSS coordinates, speed, heading and odometer-derived mileage for fleet management and dispatch.
- Ignition, door and alarm status: configurable digital inputs report vehicle status changes to Plaspy for immediate alerts and rules.
- Fuel monitoring: integrates with ultrasonic or capacitive fuel sensors to report fuel level and trigger fuel-steal alarms to Plaspy.
- Remote control of outputs: use digital outputs to command immobilizers, alarm relays or other actuators through Plaspy’s remote actions.
- Multimedia and event data: two-way audio and camera event-triggered photo upload (where camera is connected) supply richer incident context to Plaspy records.
Technical Overview
| Connectivity | 4G LTE with 3G/2G fallback; data transport via TCP/UDP/SMS; Quectel EC200 series cellular modules; LTE FDD data rates up to 10 Mbps down / 5 Mbps up |
|---|---|
| Bands | Tri-band cellular fallback (4G/3G/2G). Regional LTE bands supported by Quectel EC200 series modules (select model variants per region). |
| Power & Battery | Operating voltage 9–100 V; backup battery 500 mAh; normal power consumption ~110 mA/h; reports low-battery and power-on events. |
| Interfaces | RS232 (for RFID/OBD II readers), 1-Wire (temperature sensors/iButton), 2 positive trigger digital inputs, 1 negative trigger input (configurable), 1 analog input, 2 open-drain digital outputs (500 mA), external microphone & speaker, 5V accessory power output. |
| GNSS | Supports GPS, BDS, GLONASS, QZSS; autonomous position accuracy <2.5 m CEP; sensitivity tracking -167 dBm; cold start <26 s, warm start <15 s, hot start <1 s. |
| Memory & Storage | 128 Mb flash memory for buffered storage of positioning and event data during network blind spots. |
| Remote Management | OTA firmware upgrades (FOTA), dual-server upload support, and iStartek protocol for platform integration. |
| Environmental & Form Factor | IP66 water resistance; dimensions 99 x 54 x 19.5 mm; weight 106 g; operating temperature -20° to 75° C; humidity 5%–95% non-condensing. |
Use Cases
- Fleet management and dispatch: live GPS tracker data and driver behavior telemetry for route optimization and safety coaching.
- Anti-theft protection and immobilization: remote output control and geo-fence/parking alarms to deter theft and recover vehicles quickly.
- School buses and public transportation: route compliance, stop monitoring and two-way audio for passenger safety and incident verification.
- Taxi and ride-hailing operations: trip monitoring, driver behavior alerts and camera event upload for incident evidence.
- Insurance and leasing fleets: continuous mileage, driving behavior and fuel monitoring to support usage-based insurance and asset management programs.
Why Choose This Tracker with Plaspy
Choosing the VT200-L for Plaspy integration delivers a balanced mix of rugged hardware, flexible interfaces and platform-ready communications. Its multi-GNSS receiver and LTE connectivity provide dependable real-time tracking and accurate positioning across urban and rural environments. The built-in flash memory and tri-band fallback ensure data continuity, while extensive digital and analog I/O plus RS232 and 1-Wire support enable comprehensive telemetry such as ignition status, fuel monitoring and sensor inputs.
For operators focused on reliability and scalability, the VT200-L supports FOTA for streamlined device maintenance and dual-server upload for resilient data routing. Plaspy-compatible transport (TCP/UDP/SMS) and platform integration via iStartek protocol make onboarding straightforward. Whether your priority is fleet management, anti-theft protection, fuel monitoring or driver behavior analytics, the VT200-L provides the hardware and connectivity needed to deliver actionable insights through Plaspy’s real-time tracking and reporting environment.
Set Up VT200-L
To set the tracker send the following commands by SMS messages
- Reset factory settings
FACTORY# - Set the time zone UTC-0
GMT,E,0# - Set the operator APN
APN,{{apn}},{{apnu}},{{apnp}}# - Set the GPRS server
SERVER,1,d.plaspy.com,8888#
or
9fJByn6SxG9mEfpcF7o35i5Zo6kb - Set the update interval every 60 seconds
TIMER,60#
To check parameter settings PARAM#