Xexun - XT008

Function of gps traker:

 Rreal time tracking.
 interval tracking
 real street address replying
 track when no GPS signal.
 GPS+LBS tracking
 tracks playback.
 geofence alert
 movement alert
 overspeed alert
 Low power alert
 FOTA(firmware by the air)
 Listen in two-way communication
 vibration alert
 SOS alert
 Alert when cutting off the GPS antenna
 Alert then cutting off the external power
 Alert when switching on the ignition illegally
 Dual SIM,shift to the workable GSM operator automatially when the other GSM operator is not working or an roaming area
SD card (optional)
RFID (optional)
Remote the engine. (optional)
 Fuel monitoring,temperature monitoring( optional)                                                                                                   
camera (optional).   


SpecificationS of gps tracker

1-Oil Tester-for option.To test the oil level of oil tank of vehicles. 
2-Report the battery strength 
3-Temperature sensor
This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up XT008


To set a Xexun device on 8HoScc, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
  2. Set up our operator APN
    pO89kAen8 MTrDxt1
  3. Set the username and password of our APN.
    xPNK4srtJBNOn 5vUNGZKp
    oyl9FfhC5NTREk5 dx74gf7u
  4. Establish the server where we will connect
    RuaN8UCuC3bhv asocF29gDkgeR k2sy
  5. Set the device to send data
  6. How often we want to establish the position is sent every 60 seconds