The T366 is an enhanced OBD GPS tracker designed for vehicle monitoring and Plaspy compatible deployments. Plugs into any standard OBD‑II port for tool‑free installation, the T366 combines a u‑blox 6M GNSS module with assisted‑GPS, internal GSM and Wi‑Fi radios, and a built‑in immobilizer to deliver reliable real‑time tracking, anti‑theft capability, and rich vehicle telemetry for fleet management and driver behavior analysis.
Optimized for integration with Plaspy, the T366 automatically switches between Wi‑Fi and GPRS to balance connectivity, reduce data costs and preserve continuous reporting. With full OBD-II and CAN support (including SAE J1939 and J1708/J1587), configurable driver behavior detection, voice monitor and FOTA updates, the T366 is a compact, professional solution for fleet managers, insurers and rental operators who need precise, Plaspy compatible tracking and actionable vehicle intelligence.
Key Highlights
- Plaspy compatible OBD GPS tracker: quick OBD‑II plug‑in installation with full protocol support for fast integration and deployment.
- Accurate GNSS positioning: u‑blox 6M with A‑GPS, autonomous accuracy under 3 m and SBAS to about 2.0 m for reliable real‑time tracking.
- Dual‑mode communications: automatic Wi‑Fi / GPRS switching to optimize connectivity and data costs while maintaining real‑time updates.
- Built‑in immobilizer and digital engine cut output for anti‑theft control and remote immobilization through Plaspy.
- Comprehensive vehicle telemetry: OBD/CAN data, battery voltage monitoring and configurable driver behavior detection for fleet management and driver profiling.
- Firmware updates over the air (FOTA) via GPRS or Wi‑Fi for easier remote management and security maintenance.
- Compact, rugged form factor for vehicle use with wide power range (8–32 VDC) and onboard backup battery for continued reporting on power loss.
How It Works with Plaspy
The T366 transmits GNSS coordinates, OBD and CAN telemetry, event alerts and driver behavior events to the Plaspy platform using either GPRS or Wi‑Fi. Plaspy ingests these data streams for real‑time tracking, alerting and historical reporting, enabling fleet managers to act on location, performance and security insights.
- Real‑time location and telemetry updates: GNSS positions and OBD/CAN parameters sent to Plaspy for live maps and replay.
- Ignition, engine cut and immobilizer controls: digital output and built‑in immobilizer support remote immobilization workflows through Plaspy.
- Driver behavior and event alerts: eight configurable behavior detections (e.g., rapid acceleration, harsh braking, fatigue driving) appear as events in Plaspy for scoring and coaching.
- Battery and power loss reporting: vehicle battery voltage monitoring plus a 3.7 V, 180 mAh backup battery ensure continuity of critical alerts.
- FOTA and remote device management: update firmware and adjust settings over GPRS or Wi‑Fi to keep devices current when connected to Plaspy management tools.
Technical Overview
| Model | T366 (OBD GPS tracker) |
|---|---|
| Connectivity | Dual‑mode GPRS (quad‑band) and Wi‑Fi 802.11 b/g/n |
| Bands | GSM 850 / 900 / 1800 / 1900 MHz; GPRS multi‑slot class 12 |
| GNSS | u‑blox 6M with A‑GPS; autonomous accuracy <3 m, SBAS ~2.0 m; sensitivity down to ~‑162 dBm |
| Wi‑Fi | 802.11 b/g/n, WPA/WPA2/WPS; auto switch between Wi‑Fi and GPRS for reporting |
| Power & Battery | Operating 8–32 VDC; backup Li‑Polymer 3.7 V, 180 mAh; typical current ~70 mA active, 10 mA sleep |
| Interfaces | OBD‑II plug (J1962), supports OBDII & CAN protocols (J1850 PWM/VPW, ISO9141‑2, ISO14230, ISO15765‑4 CAN, SAE J1939, J1708/J1587); micro USB for config; normal‑size SIM slot; indicator LEDs; one digital output (engine cut) |
| Sensors & Memory | 3‑axis accelerometer (±2/4/8/16 g configurable), vehicle battery voltage sensing, optional temperature sensing, ~16 MB internal memory (~40,000 records) |
| Features | Built‑in immobilizer, voice monitor, geo‑fencing (circular/rectangular/polygon up to 32 points), tracking by time/distance/course/status, driver behavior detection (8 types) |
| Remote Management | FOTA via GPRS or Wi‑Fi, auto APN, auto time zone identification |
| Form Factor & Dimensions | 62 × 50 × 23 mm (45 × 50 × 23 mm excluding J1962 connector); weight ~56 g |
Use Cases
- Fleet management: monitor vehicle location, driver behavior, and vehicle health for route optimization and productivity improvements.
- Anti‑theft and immobilization: detect theft events and remotely immobilize vehicles using the built‑in immobilizer and engine cut output via Plaspy.
- Insurance and usage‑based monitoring: collect driving events and OBD telemetry to support telematics insurance programs and risk scoring.
- Rental and roadside assistance: accurate location and vehicle status reporting for quick dispatch, recovery and support.
- Driver profiling and safety programs: identify harsh driving, fatigue patterns and no‑warmup events to reduce risk and training costs.
Why Choose This Tracker with Plaspy
The T366 offers a balanced combination of accurate GNSS, rich OBD/CAN telemetry and communication flexibility that makes it well suited for Plaspy deployments. Its plug‑in OBD form factor simplifies installation across mixed fleets, while automatic Wi‑Fi/GPRS switching and FOTA support lower operating costs and simplify remote management. Built‑in immobilizer control and comprehensive driver behavior detection deliver security and actionable insights, so fleet operators and insurers can reduce risk and improve uptime.
For organizations using Plaspy, adding the T366 provides reliable real‑time tracking, detailed telemetry and remote control capabilities in a compact package. Whether you need fleet management, anti‑theft protection, telemetry for fuel and ignition analysis via OBD, or driver profiling, the T366 is engineered to deliver consistent performance and straightforward Plaspy integration.
Set Up T366
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.