• Send data to two servers simultaneously.
• 3-Axis Digital Accelerometer movement status monitoring.
• Firmware upgrade by OTA.
• Support DC 9v --50v , over-voltage protection.
• Send commands to GPS trackers via GPRS or SMS.
• Send GPRS data to IP or domain name.
• Google map link sent via SMS.
• Voice monitoring function with microphone.
• user defined settings on I/O ports: digital input, digital output.
To see the traces of AT05, please.
• GSM: Quad-band: GSM850 / E-GSM900 / DCS1800 / PCS1900.
• u-blox GPS module with high GPS positioning accuracy.
• SMS, GPRS TCP / UDP communications.
• Real time tracking and history data traces tracking.
• Track by cell phone or web based tracking software.
• Real-time tracking (Time, Distance Interval or Intelligent Mode).
• Alarm types: Over-speed, Low power, tremble, Parking, SOS,exterior power off, Internal power low alarm.
• Control car doors close/open, Detect the status of engine on/off.
• Intelligent power management: normal, sleep, deep sleep.
• flash memory for data storage in GSM blind area.
•Sleep mode for Saving Power and GPRS traffic.
• Backup battery: 300 mAh Li Polymer battery.
• Geo-fencing reports: into-Geo-fence; Out Geo-fence.
• Motion sensor for vehicle motion detections.
• Different GPRS data string sending intervals:
• sending data at certain interval in engine on or tremble state;
• sending data at the other interval in engine off or still state.
To set z2unCr you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000
- Factory reset
- Set up our operator APN
- Establish the server where we will connect
- Set ACK
- Data sending mode (60 seconds)