Built-in 2.4G RFID receiver.
Built-in antenna and battery.
Support GPRS(TCP/UDP), SMS, tracked by software/cell phone.
Support mini USB port to update firmware.
Low power consumption.
With Microphone and listen-in function.
With 32Mbit memory, can store about 16000 PCS data.
With Temperature sensor and control or detect car door/engine on/off.
GPRS alarm function:Over-speed /Geo-fence /Low battery /Power Cut/Motion/SOS..
To set Factory IL GPS you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR
- Set up our operator APN
- Define how often will transmit to our example 120 seconds
- Establish the server where we will connect
- Activate the GPRS mode