vehicle gps tracker KT103
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.
1 Main Function
1.1Positioning and Tracking: Through the online Positioning Platform or the cell phone to locates at times, and get the working status. You
can choose the Positioning Platform by yourself.
1.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will
send out alarm to the authorized numbers.
1.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime.
1.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5
1.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement
alertto all authorized numbers.
1.6Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed
alert to all authorized numbers.
1.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers
when it breaches the district.
1.8 the unit: send SMS to resume the default of unit.
1.9 Auto Track: You can set up auto track by SMS or on-line positioning platform.
1.10 Mileage statistics; ACC checking; cutting off power and alarm.
1.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
1.12 Modify the IP and Port of Communication Protocol for different on-line positioning platform.
l Vehicle rental / Fleet management etc
l Protect wealth etc
lProvide peace-of-mind for businessmen
l Manage personnel
To set fV4152 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device and the APN are to APN_OPERADOR
- Begin with the configuration
- Set up our operator APN
- Set up APN's username
- Set up APN's password
- Establish the server where we will connect
h32tthVHprrXU KQh5yoilqvP5j qIly
- Set the update interval in 60 seconds
- Switch to GPRS mode to begin transmission