Device: GLONASS GPS, conducting satellite tracking of the object Channel tie with DC - GSM 900/1800 - sending / receiving data to DC, using data transmission; - sending / receiving data on the DC using GPRS; - sending / receiving data on DC using SMS; - receiving from the subscriber's SMS-messages; - handover of SMS-messages.Determination of coordinates: 50-channel high sensitivity GLONASS / GPS receiver MNP-M7. voltage supply DC from 9V to 50V and built-in rechargeable battery. Current consumption in active mode - no more than 180mA at a voltage of 12V. The current consumption in standby mode - no more than 65mA, the supply voltage of 12V. The current consumption in sleep mode - no more than 20 mA, the supply voltage of 12V. Built-in rechargeable battery with up to 600 mA / h. The average time of standby for at least 6 hours. Time of technical readiness of the device to work - no more than 3 minutes. Enclosure IP30. Overall dimensions of the device is not more than 110 × 80 × 32 mm. Weight device 300g.
Use Plaspy with a tracker
Set the Operator APN
- Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server IP Port 184.108.40.206 8888
- Add on your Account on devices with the IMEI or unique ID.