NR008 is automobile GPS tracking device, it works with our Auto GPS Tracking system perfectly.
·Anti-theft of Vehicle
BRIEF FUNCTION OF AUTOMOBILE GPS TRACKING DEVICE
1. Engine remote control: You can stop oil supply by SMS/ GPRS remotely
2. Over-speed alarm: Both software and authorized mobile number will receive alarm when target is over a specified speed. This speed limitation should be set in advance.
3. SOS Function: Alarm will be sent to software and authorized number when SOS is pressed once emergency.
5. Movement alert: Send a movement alert to the user when it begins to move.
6. Assistant alarm: compatible with original car’s anti-theft system
7. Voice monitoring: Use the authorized number to call the device, you will hear the voice in the vehicle.
8. Anti- dismantle: It will alarm when lose the power of car
· GSM Module：SIMCOM
· Frequency: 850/900/1800/1900Mhz and 2100MHz(3G)
· Max RF output : 33.0dBm±2dBm: 33.0dBm±2dB
· Dynamic input range : -15 ~ -102dBm -15 ~ -102dBm
· Frequency stabilities: >2.5ppm
· RMS Deviation: ≤5deg
· GPS chipset: SIRF Star
· Channels: 20
· Capture time: 0.1 sec., average
· Hot boot: 2 sec., average
· Warm boot: 38 sec., average
· Cold boot: 44 sec., average
· Height limit: 18000 m
· Speed limit: 515 m/s
To set wma3JNj Kp QgQ you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is D92RDD which is the initial data from the device
you can get the device Id, sending the command to check the device status, the device Id is the first word normally starts with NR
- Set up our operator APN
- Establish the server where we will connect
- Switch to GPRS mode
To check settings H6qaly9EAKf
Device Id, APN, server, port, GPRS status (1), GPRS connection status (1), GSM signal (1-31)