Loading...

Megastek - MT-100

Handheld Tracker MT-100

Features:

Waterproof (waterproofing grade: IP66)
◆AGPS position assisted
◆SOS alarm (LBS position assisted)
◆SOS emergency calling
◆Two-way communication
◆Monitoring mode
◆Pet mode
◆Long standby time mode
◆SMS and GPRS (TCP/UDP) communication
◆Support up to 5 authorized cell phone numbers
◆Real time tracking
◆Over speed alarm
◆Geo-fence alarm
◆Vibration alarm
◆Low battery alarm
◆Data Logger in no GSM signal area using Micro SD card (Max: 2GB)
◆Belt-off alarm
IP66 the meaning of waterproof as follows: IP6X: Totally protected against dust

IPX6: Protected against strong jets of water e.g. for use on ship decks - limited ingress permitted.
(GB4208-2008/IEC60529:2001)
This information only is for informational purposes only, Factory IL GPS does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up MT-100

Country
Operator
APN
User
Password

To set EpO4v6 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

Type the IMEI number
  1. Set the identifier 15 X tracker replace the IMEI tracker
    fIjWN6MqYz4O79ZUuu8Ptv41uiiCZeD o v1Ue3NTMTXY8lvmJ8hI037ZtNsloXJQ3vP
  2. Set up our operator APN
    vxhsWuJraRYph89zmdkgJgEwyfAkIX23l2NI
  3. Define how often will transmit to our example 120 seconds
    eMVSgeCHmaIBDW
  4. Establish the server where we will connect
    dGp5agav6VX5Q 85ZE2VNuxckQLmozJH
  5. Enable GPRS mode
    Sbnt7EYhifqo