Loading...

Concox - TR02

GPS Car Tracking Device with Built-in Antenna TR02


Specification

 
Concox TR02 is its first GPS vehicle tracker only with simple locating & tracking system. Its simplicity enables it appeal to the majority of the target market. And it is cheap and cost-effective so that many of us can afford to buy one.

1.  Group Management
     You can manage the vehicle by setting up difference groups.
2.  Geo-fence Notification
     Setting up a zone to monitor the vehicle when it enters or exits this zone.
3.  Multiple Account Support
     Allow you to set up an account for company users to manage many vehicles. 
Weight 53g
Dimensions 86.7 ( L) X 44.0 (W) X 13.7 (H) mm
Working voltage/current 9-36VDC / 25mA
Operation temperature -25℃ - 60℃
Operation humidity 5% - 95% RH
LED indicator Three LED indicators: GPS-blue; GSM-green; Power-red
GSM frequency 850/ 900/ 1800/ 1900 MHz
GPRS Class12, TCP/ IP build in GSM Module
GPS MT3326
Frequency L1,1575.42MHz C/A code
GPS antenna Built-in high gain ceramic patch antenna
GPS Channels 20
Tracking sensitivity -159dBm
Acquisition sensitivity -144dBm
Locating time cost Hot start: <2 sec(open sky)
Warm start: <15 sec
Cold start: <38 sec(open sky)
Certifications CE, ROHS

Feature List

  • GPS + GSM + GPRS wireless network
  • Built-in high sensitive GPS chipset
  • Built-in GSM & GPS antenna
  • Real-time tracking
  • Start working automatically after electrifying
  • Built-in monitor circuits to avoid breakdown
  • Built-in ON / OFF power, wide voltage input range
  • Built-in acceleration sensor for saving power intelligently and Resisting static drifting
  • Installing method: covert / open
  • Three LED indicators: GPS - Blue; GSM - Green; Power - Red
  • Check location via platform service

 

 

Set Up TR02

Country
Operator
APN
User
Password

To set BiPIYCQ ts 4US you need to configure as follows. With the following commands through several text messages:

  1. Reset factory settings
    eh7hOfHK
  2. Set the time zone UTC-0
    Hv0SKpP1
  3. Set up our operator APN
    luCmrrAIOJsoi5gmzNPyEC9WqmO4DH
  4. Establish the server where we will connect
    dFFGluhgVMruutcPMcR0pr5PPwhdd
    or
    h8HBjT4FcfWzzgFz7g9x2vaniivp6E
  5. Define that transmits every 60 seconds
    FZvKz1zND
    or
    aLxFIAqLSVSY
  6. Enable GPRS
    DUnblVrLg

To check parameter settings D9QG31FH