GPS Personal Tracker PT80
1.Small size(65 x 42 x 20 mm),Portable(50g)
2.Built-in GSM and GPS antennas
3.Quick dialing buttons for 3 preset phone numbers
5.Panic Button for emergency situation
7.Low power alert
8.Over speed alert
9.Tracking via SMS /GPRS
10.Get street address by SMS request
11.Get Google link for current location by SMS request
12.Web-based real time tracking service(demo.livegts.com)
13.Internal motion sensor to save power and send movement alarm
14.Equipped with internal battery, rechargeable,long standby time
15.Position logging capacity up to 3,000+ waypoints when no GPRS signal
16.Save up to 50% GPRS cost when working on web-based tracking software LiveGTS
17.Available to set different alarm notification ways when alarm (sending alarm via SMS/call/platform)
To set a Bofan device on NcIj8b0 F6 RJO are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.
With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial of the device and data APN from your operator.
The most common commands for these enabled devices are placed (You should consult your manual).
- Delete settings
- Set 14-digit identifier to be used with NcIj8b0 F6 RJO normally the last 14 digits of IMEI, replace XXXX by the identifier.
UmtXXSV16CpiTUBqv3oMZUEKOFYCc w d73FJN2EoCCL16kQni
- Set the APN of your operator, the values Replace your operator
- Establish the server where we will connect.
- How often we want to establish the position is sent every 1 minute